|
|
 |
|
|
※Product Category:Appendix >> GLQ-110 Dust filter Source：www.tgking.net |
|
|
新建网页 2
新建网页 2
|
The GLQ-110
filter is specially customized by Nanjing Tigerkin Instruments Co., Ltd.
for filtering dust in gas analysis and sampling. |
|
◆Overall stainless steel, sealed without leakage |
◆Reusable and low cost |
|
◆Up to 700 ℃ high temperature resistance |
◆Good dust filtering effect |
|
1. The GLQ-110 filter housing
is made of stainless steel, and the chamber is sealed to prevent
leakage. It can be used for PPM level gas measurement |
|
2. The filter has a built-in
100 mesh filter element, which can basically meet the requirements of
dust filtration. After filtering for a period of time, the dust can be
cleaned up by back blowing or water washing, and can be reused |
|
3. The filter is equipped with
two types of nozzles, one of which is threaded connection, and the inner
part is made of 3 * 0.5mm stainless steel gas pipe |
|
4. The other type can be
connected with a pagoda mouth sheathed leather tube with an inner
diameter of 6MM. Convenient choices for different customers |
|
5. The outer diameter of the
filter body is 45MM, the wall thickness is 1.5MM, and the length is
110MM. The large end is for air intake, and the small end is for air
outlet |
|
6. The removable dust volume is
about 80 cubic centimeters, and the pressure bearing capacity is less
than 3KG=0.3MPA |
|
|
Share
information： |
|
Degree Of Heat：1154℃
Entry Time：2012/9/29 【Print】 【Back】 |
|
|
|
|
|
苏ICP备11027678-1号