|
|
|
※Product Category:lscp >> WYF-1 Gas pressurizer Source:www.tgking.net |
|
In order to
solve the problem that the majority of users cannot stabilize the intake
pressure when using our products, our company has |
designed and selected a WYF-1
gas regulator valve, which can be used in conjunction with our
instruments to protect the instrument and |
prevent instrument damage due
to unstable pressure. The WYF-1 gas regulator valve also improves the
stability of measurement. |
◆ This valve is suitable
for gas chromatographs or other instruments to stabilize carrier gas,
auxiliary gas, and other gas sources when the |
input pressure changes
erratically. This pressure stabilizing valve can be used with various
instruments of our company. WYF-1 gas pressure |
stabilizing valve is usually
used with ZO-100 high oxygen analyzer, ZO-201 zirconium oxide oxygen
content analyzer, EC-400 series |
electrochemical oxygen
analyzer, DPM-600 series dew point analyzer, etc, Economically simple
and reliable. |
Input
pressure: ≤ 0.6Mpa |
|
Stabilized
voltage output: 0-0.4Mpa |
Flow output: 0-1000ml/min |
Voltage stabilization accuracy: ≤ 0.002MPa/cm2 |
Pressure drop range: ≥ 0.05Mpa |
Inner hole size: 3mm for connecting 3mm pipes |
Inlet and
outlet external connector: M8 × 1 (one in and two out) |
Overall dimensions: Φ 24X110mm |
Product weight:
about 0.8Kg |
|
The
pressure stabilizing valve usually has one inlet and two outlets, one of
which can be connected to a pressure gauge or not blocked. |
The inlet is marked with an
arrow, and the output pressure is adjusted by the knob. Turning it
counterclockwise decreases the output |
pressure, while turning it
clockwise increases the output pressure. Precision valves should be
adjusted slowly. In order to achieve a good |
use effect, the pressure
stabilizing valve should be turned counterclockwise so that the output
pressure is 0, that is, closed. |
|
Share information: |
|
Degree Of Heat:3264℃
Entry Time:2015/10/9 【Print】 【Back】 |
|
|
|
|
|